High Volume Vane Air Diaphragm Sampling Pump has one moving part for continuous draw and low maintenance. Sampling pump has an adjustable regulator with a locked-in operating range of 3-20 LPM. It meets the requirements of OSHA and AHERA standards for air sampling safety.
The Defender 510 can take hands-free continuous readings while quickly and accurately setting the flow rate on a air sampling pumps. The Defender 510 connects to any PC and pre and post-calibration results can be downloaded with the included software.
The DryCal DC-Lite uses the patented DryCal near-frictionless piston technology and photo optic sensors to obtain volumetric flow readings quickly and accurately. Housed in a small 5" x 5" x 2.75" case, each unit is power-packed with a variety of popular user conveniences such as AC/DC operation, a large alphanumeric LCD, push-button read and auto-read functions, automatic shut-off and a parallel printer port that interfaced with standard IBM compatible printers.
It provides users with a primary flow standard for industrial hygiene, environmental and laboratory applications. The patented DryCal near-frictionless piston technology eliminates the need for messy soap film solutions.
The Accuro 2000 is a battery powered gas detector pump that used in combination with the Dräger Accuro gas detector pump and Dräger colormetric gas detection tubes.
The Accuro manual pump works with Dräger Gas Detection Tubes for a reliable and convenient testing method for spot measurements such as the detection of concentration peaks, confined space entry, and worst-case scenarios. Easy to operate with just one hand, the Accuro bellows-style pump lets you accurately sample the air without the need for any electricity, making it ideal for areas with explosion hazards.
The Model 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The printout shows cumulative and differential count data for each size range.
For maximum flexibility, four modes have been incorporated to provide quick answers to measurement questions or to allow unattended operation. The manual mode completes one count cycle then turns the air pump off to prolong battery life. Auto mode repeats the count cycle for the number of cycles programmed to allow unattended monitoring. Concentration mode gives a quick estimate (within seconds) of the particle concentration. Beep mode provides one beep after the count exceeds a selected limit, which is handy for isolating sources of particle contamination such as leaks in filter banks
With the widest range of any PID rental we offer, the MiniRAE 3000 can detect VOCs up to 15,000 ppm. Additionally, advanced PID applications are even easier then before with up to a 3 point calibration, memory for the calibration of 8 seperate gases, and a large graphic LCD display with dataplot views. Like its predecessor, the MiniRAE 3000 is intrinsically safe and comes standard with datalogging.
The Sensidyne Gilian GilAir-5 Constant Flow Sampling Pump provides industrial hygienists and safety managers with a dynamic air sampling system operating at a flow rate of 1-5000 cc/min. This comprehensive 3-in-1 sampler performs filter cassette, single and multiple sorbent tube sampling with constant flow accuracy, while offering convenient programmable timing options.
Achieve flow rates that you couldn't reach before when using a personal sample pump. The Leland Legacy provides high flow pump power in a compact, portable sampler, with High flows from 5 to 15 L/min. High flows for a period of 24 hours can be accomplished on one rechargable Lithium-ion battery pack. The patented internal flow sensor measures flow directly and acts as a secondary standard to constantly maintain a pre-set flow. The set flow is achieved immediately at start-up and is automatically corrected for variations in temperature and atmospheric pressure.
The patented Sioutas Cascade Impactor separates and collects ultrafine, fine, and > 2.5-micron airborne particles (five size ranges including > 2.5, 1.0 to 2.5, 0.50 to 1.0, 0.25 to 0.50, and < 0.25 micron. Particles above each cut-point are collected on a 25-mm PTFE filter in each appropriate stage when the Sioutas Impactor is used with a 9 L/min sample pump. Particles less than the 0.25-micron cut-point of the last stage are collected on a 37-mm PTFE after-filter. The Sioutas Impactor is suitable for personal and area sampling indoors and may be used for ambient outdoor sampling with special provisions. Size-fractionated samples can be analyzed gravimetrically, chemically, and microscopically.
The Zefon Bio-Pump® Plus is the smallest and lightest portable battery powered IAQ sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell® and Via-Cell® cassettes at a flow rate of 15LPM.
The Zefon ZHV00 is an oil-less, rotary vane pump that can be used for most sampling applications with flow ranges of 0 to 30 liters per minute. The Zefon ZHV00 is lightweight and easy to use, with only one moving part for pulse-free continuous draw and low maintenance. The pump uses a a 1/10 horsepower motor and can be used with PCM, TEM, Air-O-Cell and all viable impactors.
This pump meets both OSHA and AHERA’s standards for air sampling.