Main menu:
Detector: | Photoionization sensor with 9.8, 10.6, or 11.7 eV UV lamp | |
Size: | 9.25" L x 3.6" W x 2.9" H | |
Weight: | 28 oz with battery pack | |
Battery: | A 3.7V rechargeable Lithium-Ion battery pack (snap in, field replaceable, at non-hazardous location only) Alkaline battery holder (for 4 AA batteries) | |
Battery Charging: | Less than 8 hours to full charge | |
Operating Hours: | Up to16 hours continuous operation | |
Display: | Large dot matrix screen with backlight | |
Response time (T90): | 2 seconds Accuracy 10 to 2000 ppm: +/- 3% at calibration point. (Isobutylene): | |
PID Detector: | Easy access to lamp and sensor for cleaning and replacement | |
Correction Factors: | Over 200 VOC gases built in (based on RAE Systems Technical Note TN-106) | |
Calibration: | Two-point field calibration of zero and standard reference gases | |
Calibration Reference: | Store up to 8 sets of calibration data, alarm limits and span values | |
Inlet Probe: | Flexible 5" tubing | |
Radio module: | Bluetooth (2.4GHz) or RF module (433MHz, 868MHz , 915MHz, or 2.4GHz) Keypad: 1 operation key and 2 programming keys;1 flashlight switch | |
Direct Readout: | Instantaneous, average, STEL, TWA and peak value, and battery voltage | |
Intrinsic Safety: | US and Canada: Class I, Division 1, Groups A, B, C, D |